ILS – 5 pieces 3D Printer Stepstick DRV8825 Stepper Driver Reprap 4 Layer PCB

ILS – 5 pieces 3D Printer Stepstick DRV8825 Stepper Driver Reprap 4 Layer PCB

ILS - 5 pieces 3D Printer Stepstick DRV8825 Stepper Driver Reprap 4 Layer PCB

Description:

The module has an interface pinout is almost the same with A
8 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step).
It uses 8.2 – 45V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).

Feature:

Simple step and direction control interface
The interface can connect directly with 3.3V and 5V systems
Support over-temperature thermal shutdown, over-current shutdown and under-voltage lockout
Support short-to-ground and shorted-load protection
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
4-layer, 2 oz copper PCB for improved heat dissipation
Adjustable current control support

List Price: CDN$ 21.69

Price: CDN$ 21.69